With the purchase of packard bell by acer please go to our new site at www.acerweb.co.uk |
|
We ship worldwide
Remember to use our shopping cart you need to be in English so to order you cannot use Babel fish To order just click on the translated page please view this in the original language
normally same day turnaround at this link click here to go to the repair page and you can book it in online
Need help in dismantling your system?
Laptop Schematics and disassembly guides are available at this link
|
Advanced Technology Attachment (ATA), interface and pinouts for the 2.5" ide laptop drives For Standard 40 pin system see For the 50 pin laptop standard see: This connector is mostly used for 2.5 IDE HDD of notebooks and so on. See ATA pinout for pins 1-40. 44 pin IDC (0.75") male connector at the controller & peripherals 44 pin IDC (0.75") female connector at the cable
Note: Direction is Controller relative Devices (hard disks) mostly used for 2.5 IDE HDD of laptops and some other device. Equal to ATA (44) connector, except 50 pin connector used. 50 pin IDC male connector at the controller & peripherals There are 50 pins in the plug, the mating receptacle need contain only 44 pins (the removal of pins 45 and 46 provides room for the wall of the receptacle). The last four pins of the connector plug located on the device are not to be connected to the host, as they are reserved for manufacturer's use. Pins 45, 46 and 20 are keys, and are removed.
|
Normally if it shows us online below we will be available on the phones even outside normal hours
Monitoring code
|
|
Contact Information
NOTE: new tel numbers and address
G Bentley ltd
Our new offices and trade counter click for big pic Send mail to
with questions or comments about this web site.
|